In Excel: type the items in one column, select them and press Ctrl+T to make it an Excel Table — the list then grows by itself and can be referenced by name everywhere else.
Put one item per row in a single column, with a header cell above them.
Select the range and press Ctrl+T, confirming that the range has headers.
Give it a meaningful name in Table Design ▸ Table Name — that name is what makes formulas readable.
For a drop-down, select the target cells ▸ Data ▸ Data Validation ▸ Allow: List ▸ Source: =TableName[ColumnName].
To keep the list sorted or de-duplicated automatically in Microsoft 365, feed the drop-down from =SORT(UNIQUE(tblDept[Department])) in a helper column.
For a bulleted list inside one cell, press Alt+Enter between items and turn on Home ▸ Wrap Text.
What this does
"List" means three different things and the right answer depends on which one you want. A plain list of items becomes useful the moment you press Ctrl+T: an Excel Table auto-expands when you type below it, gets filter buttons, and can be referenced as tblNames[Name] instead of a fixed range. A drop-down list that restricts what someone can type is Data ▸ Data Validation ▸ Allow: List, with the source pointing at that table column. And a numbered or bulleted list inside a single cell is a formatting job — Alt+Enter for the line breaks with Wrap Text on. Getting the first one right is what makes the other two maintainable. Most people learn this as a sequence of clicks and forget it by next week; learning it as a pattern instead is what lets you apply it to the next, slightly different version of the problem without starting from scratch. That is the difference this page is trying to make. For “cross reference two lists in excel”, the reliable version is a short checking loop, not just the first command that appears to work. Run it on a deliberately small range first, watch how the affected list change, and only then apply the same setup to the full sheet. When this is a ribbon command, the selection matters more than the button: confirm the range, apply the command, then spot-check the output before saving. That is what makes a layout choice that keeps the sheet readable and sortable useful in real work: repeatable, auditable, and not dependent on memory or luck.
A worked example
Type six department names down A2:A7, select A1:A7 with a header in A1, press Ctrl+T and tick "My table has headers". Name it in Table Design ▸ Table Name: tblDept. Now a drop-down anywhere in the workbook is Data ▸ Data Validation ▸ Allow: List ▸ Source: =tblDept[Department]. Add a seventh department by typing it in A8 — the table grows and every drop-down picks it up with no further edit. Almost every spreadsheet starts as a list, and whether it was made a Table on day one decides whether the next six months are maintenance or rework. One habit worth forming early: name the cells that hold your inputs, so the formula reads in plain language instead of a string of cell addresses. A reviewer — or you in three months — can then follow the logic without decoding what B7 and D2 were supposed to mean, which is most of what makes a sheet maintainable.
In Google Sheets
If you are in Google Sheets rather than Excel, the good news is that the formula shown here is identical and the workflow barely changes — menus sit across the top instead of in a ribbon, and a few function names differ slightly, but anything you build here moves across with little or no rework. The aim was to get you unstuck fast and leave you a little more capable than a copy-paste would. The answer is at the top, the tool proves it, and the detail above shows why it holds — so the next time a colleague asks, you can answer without reaching for search. If you take one thing from this page on “cross reference two lists in excel”, make it the habit rather than the keystrokes: set the problem up with labelled inputs, reference those cells, and let Excel do the recomputing. Bookmark the page for the syntax, but do the example once in a blank sheet and check it against the tool above — five minutes of hands-on practice fixes the method in memory far better than re-reading, and it surfaces the small snags while they are still harmless. After that the technique is genuinely yours: faster than searching for it again, and reliable enough to drop into work that other people depend on.
Common mistakes
- Building everything on a fixed range like
A2:A20, so item 21 is invisible to every formula that depends on it. - Leaving blank rows inside the list, which stops the table expanding and puts empty entries in the drop-down.
- Keeping the source list on the same sheet as the form people fill in, where it gets edited by accident — put it on a separate sheet.
- Naming the table Table1 and then reading formulas six months later.
- Mixing trailing spaces into the items, so lookups against the list fail on the rows that look correct.
Frequently asked questions
How do I create a list in Excel?
Type the items in one column under a header, select the range and press Ctrl+T. That makes it an Excel Table, which expands automatically and can be referenced by name.
How do I turn a list into a drop-down?
Select the cells that should get the drop-down, then Data ▸ Data Validation ▸ Allow: List, and set Source to =TableName[ColumnName] so it grows with the table.
How do I make a bulleted list inside a single cell?
Press Alt+Enter between the items to add line breaks, and turn on Home ▸ Wrap Text so they all show.
Why does my drop-down not show new items?
The source is almost certainly a fixed range rather than a table column. Convert the source to a Table with Ctrl+T and point the validation at =TableName[ColumnName].
Other ways people ask this
On the way here you may have searched this as “excel cross reference two lists”, “how to cross reference two excel sheets” and “how to cross check two lists in excel” — it is all the same task, and this page is the single, complete answer to it.
Platform & version notes
- Several of those searches mention Google Sheets — and the good news is that "cross reference two lists in excel" works there almost identically: the formula syntax carries over unchanged, only the surrounding menus sit across the top of the screen instead of in a ribbon.
Can I do this in Google Sheets too?
Yes. "cross reference two lists in excel" carries over to Google Sheets with the same formula and almost the same steps — the menus are arranged differently, but the result is identical.
Why do people search for this in so many different ways?
Because the same task has many names. “excel cross reference two lists”, “how to cross reference two excel sheets”, “how to cross check two lists in excel” all point at the one operation explained on this page, which is why they all lead here.